Skip to main content

Work areas in the mobile app

Learn how to create a work area from an AI segment in the Duranta mobile app, set its distance and color, adjust its shape and add it to an estimate.

A work area is the area your crew will actually work on, such as a 10 ft mulch band around the beds. You build it from an AI segment, and Duranta measures it for you. Work areas are saved with the property and show up in the web app too.

Create a work area

1. Open the property and tap View measurements.

2. In Areas, tap the segment you want to start from, such as Beds.

3. Tap Create work area.

4. Set up the work area:

  • Distance: how far the work area reaches past the segment.

  • May overlap: the AI categories the work area may cover. Unchecked categories are cut out of it.

  • Include the source area: turn on to keep the segment itself inside the work area.

  • Clip to the property boundary: turn on to stop the work area at the lot line.

  • Name: Duranta suggests one, such as Beds + 10 ft. Change it to something your crew will recognize.

  • Color: the color of the work area on the map.

The map shows the work area as you change the settings, with its Area and Perimeter at the bottom. For a line, such as a fence, Duranta shows the Length instead.

5. Tap Save.

💡 Pro tip: To start from several segments at once, tap Select areas in Areas, select the segments on the map, then tap Create work area.

Adjust the shape by hand

1. In Work Areas, tap the pencil next to the work area, then tap Adjust shape.

2. Use the tools at the bottom: Adjust to move nodes, Draw to add to the shape, Erase to remove part of it, and Scale to resize it. Use the arrows at the top to undo or redo.

3. Tap Done, then Save.

If you change the distance or another setting after adjusting the shape, Duranta asks whether to rebuild it. Rebuilding creates the shape again from the settings, and your manual changes are lost.

Use and manage work areas

Your work areas are listed under Work Areas in Areas:

  • Tap the add icon next to a work area to use it as the area of a new service in an estimate.

  • Tap the eye to show or hide a work area on the map. The eye next to the Work Areas heading shows or hides them all.

  • Tap the pencil to change a work area.

  • Tap the trash icon to delete a work area, then confirm.

For the same tool in the web app, see Work areas in the web app.

Did this answer your question?